Basic Info.
Model NO.
High Speed Slitting Line
Production Scope
Product Line
Raw Material
Cr Steel, Al, PPGI, Hr, Silicon Steel
Package
Naked Package and Fixed in The Container
Transmission Type
Flexible
Automatic Production Line
Cutting Operation
Certification
CE, ABS, ISO, LR
Flexible Production
Intelligent Manufacturing
Rhythm
Flow Production Line
Transport Package
1*20 Gp Container
Origin
Jiangsu, China (Mainland)
Product Description
Middle Thickness Steel Coil Slitting and Rewinding Machine Line
Middle Thick Slitting LineCapacity of middle thick steel coil slitting line is mainly used to slit steel coils of thickness 0.6~5 mm, 1~6 mm, 2-8mm or 3~10mm. And for steel coils with width: 600~1600 mm, 800~1800mm or 800~2000mm into narrower baby coilsIntroduction:
Capacity of middle thick steel coil slitting line is mainly used to slit steel coils of thickness 0.6~5 mm, 1~6 mm, 2-8mm or 3~10mm. And for steel coils with width: 600~1600 mm, 800~1800mm or 800~2000mm into narrower baby coils. This steel slitter is widely used for proving steel strip coils for cold rolling mill, welded pipe mill, roll forming machine, etc.
Advantages & Characteristics:
1.Weight of middle thick steel coils usually with weight up to about 30Tons, in this case, double mandrel uncoiler is necessary to load so heavy coils. Double mandrel decoiler can be made to three steps respectively for three kinds of international standard inner diameter coils Φ508mm, Φ610mm, Φ760mm. At the same time, Double mandrel decoiler can made to be double cones without steps that can support and decoil a wide range of different ID coils from Φ480-800mm for the special steel slitting machine.
2.There are one or two hole accumulators in the middle thick coil slitting line, which depends on minimum thickness, slitting speed, etc factors. One pit accumulator always lies after slitter and before tensioner.
3.According to functions & solidity request of each steel slitter unit, we adopt suitable structure and use proper and enough material to make each steel coil slitting line unit.
4.Good material and precise sizes of disc knives, spacers and rubber rings on slitting shaft for our steel slitting machine can make sure little burrs, little cambers(±0.10mm/m), no stickiness to knives and precise slit width(+/-0.05mm).
5.Edge scrap reeler of our steel slitter uses torque motor, making sure evenly and synchronously wind edge scraps up.
6.To change disc knives fast, double steel slitter can be chosen. When one steel slitting machine is working, workers can install knives on the other slitter, then just exchange locations of two steel coil slitting line to continue work.
7.Double press rollers are installed on each equipment sequently following each hole accumulator, in case strip head falls in hole while feeding strip head through steel coil slitting line.
8.Coils separating & pressing-down bracket is installed on recoiler, hydraulically driven, press on recoiling block tight and automatically move up while recoiling diameter becomes bigger. The detail specification of Steel Slitter as follows:
1. SW-(0.6~5)×1500mm Steel Coil Slitting LineInput coils: HR/CR carbon steel, colored steel, galvanized steel, etc.
Steel Slitting Machine Strip thickness: (0.6-5) mm
Strip width: 500~1500mm
Steel Slitter Inner diameter of coils: Φ508mm, Φ610mm, Φ760mm
Max.outer diameter of coils: Φ2000mm
Max.coil weight: 30000kg
Steel Slitter shaft: Φ250 x 1550mm
Material of disc cutter: 6CrW2Si, HRC55-58.
Steel Slitting Machine Motor: DC 110KW, with Eurotherm 590 DC speed driver.
Recoiling spindle: Φ508×1550mm
Recoiling motor: DC 132KW, with Eurotherm 590 DC speed driver.
Steel Slitter speed: (0~80) m/min, adjustable2. SW-(1~6) ×1600mm Steel Coil Slitting LineInput coils: HR/CR carbon steel, colored steel, galvanized steel, etc.
Steel Slitter Strip thickness: (1~6) mm
Strip width: 600~1600mm
Inner diameter of coils: Φ508mm, Φ610mm, Φ760mm
Max.outer diameter of coils: Φ2000mm
Max.coil weight: 30000kg
Slitting shaft: Φ260 x 1650mm
Steel Slitting Machine motor: 110KW DC
Recoiling spindle: Φ508×1700mm
Recoiling motor: 132KW DC
Steel Slitter speed: (0~70) m/min, adjustable 3. SW-(2~8)×1800mm Steel Coil Slitting LineInput coils: carbon steel, color steel, galvanized steel and etc
Strip thickness: (2~8) mm
Strip width: 600~1800 mm
Inner diameter of coils: ≥Φ508mm
Max.outer diameter of coils: Φ2100mm
Steel Slitting Machine Max.coil weight: 35000kgs
Steel Slitter shaft: Φ280 x 1850mm
Slitting motor: 132KW DC motor
Material of disc cutter: 6CrW2Si, HRC56°~58°
Recoiling spindle: Φ508×1900mm
Steel Slitting Machine Recoiling motor: 160KW DC motor.
Slitting speed: (0~80) m/min, adjustable 4.SW-(3~10)×2000mm Steel Coil Slitting LineMaterial of coils: carbon steel, color steel, galvanized steel and etc
Strip thickness: (3~10) mm
Strip width: 800~2000mm
Steel Slitter Inner diameter of coils: ≥Φ508mm
Max.outer diameter of coils: Φ2000mm
Steel Slitting Machine Max.coil weight: 35000kgs
Material of leveling roller: 40Cr
Steel Slitter shaft: Φ300 x 2050mm
Material of disc cutter: 6CrW2Si, HRC 55-58
Steel Slitting Machine Recoiling spindle: Φ610×2100mm
Slitting speed: (0~60) m/min, adjustableDetail information of Steel Slitting Line:Model | Thickness | Width | Coil Weight | Finished slit width | Max Slitting speed |
SW-5 x 1500 | 0.6-5mm | 500-1500mm | Max 30T | Min. 40mm | 80m/min |
SW-6 x 1600 | 1-6mm | 600-1600mm | Max 30T | Min. 50mm | 70m/min |
SW-8 x 1800 | 2-8mm | 600-1800mm | Max 35T | Min 50mm | 80m/min |
SW-10 x 2000 | 3-10mm | 800-2000mm | Max 35T | Min 60mm | 60m/min |
Note: The data in the form just as reference according to general ranges, we always design and make each steel slitting machine according to each customer's specific requirements, so each customer can buy his own well-content line from us. |
Middle Thick Slitting Line Layout Drawing
FAQ:Q:What's your Warranty ?
12 months, during which all parts damaged because of quality problem will be changed for free.Q: What's your delivery Time ?
Within 45-60 days after receiving prepaid. Some machines in stock, can be delivered at any time.Q: What's your payment terms ?
30% deposit is paid before production, the balance paid after inspection confirmation before shipment.Q:What's your Install and Training ?
If buyers come to our factory to inspect, the training to install and operate is provided face to face.
If not, manual and video is provided to show how to install and operate.Q: What's you after-sale service ?We provide 24-hour online service for our customers.A.The seller will debug the machines freely in China, and the traffic expense in China of the technique people will be paid by the seller.When technique men go to the buyer's place to debug the machines, the buyer should pay the expense of accommodation, and traffic for the buyer's men.
B. If the buyer sends people to receive the training of the operation given by the seller, during the training period, the seller should pay the expense of accommodation, and traffic for the buyer's men.Q: How to place order ?
Inquiry---confirm the profile drawings and price----confirm the PI---arrange the deposit or L/C---then OKQ: How to visit our company ?
Fly to Shanghai airport: By high speed train From Shanghai to Wuxi (30 min),then we can pick up you.
Address:
No. 601 of Zhihui, 568 Building, No. 990 of Jianghai West Road Wuxi, Jiangsu, China
Business Type:
Trading Company
Business Range:
Electrical & Electronics, Industrial Equipment & Components, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001, ISO 9000
Company Introduction:
Wuxi Sunway Machinery Co., Ltd. is specialized in manufacturing shape steel cold roll forming machines, slitting line, cut to length line and whole group international trade business.
We have high technological background, advanced production equipment, strict inspection, matured after-sales work and thoughtful service. We could design different types of roll forming machine according to clients′ requirements!
Our customers are around the world, especially in India, Middle East and North Africa. In Middle East, we have exported much to Iran, Iraq, Kuwait, Jordan, and Saudi Arabia. In North Africa, we exported much to Egypt, Libya, Algeria, and Sudan...Not only this, we also exported to Germany, Romania, Serbia, India, South Africa, El Salvador, Venezuela etc countries. Our core values are "Quality, Efficiency, Credibility & Integrity", which can firmly and solidly support us to go far.
Welcome to our company for visiting and business!